Pakistan France Vermon-World Leader in OEM Probe Solutions

• Vermon has R&D centers and production facilities in both Tours, France, and Pennsylvania, USA.
• Global team of 400 professional researchers
• 30 years of high-frequency probe research
• Over 500 international clients worldwide
• Annual supply of 150,000 probes

Product Description

Key factors Affecting Ultrasound Probe Image Quality

The image quality of medical ultrasound probes is essentially a dynamic balance and optimization of resolution, penetration depth, and sensitivity. These three factors constrain yet depend on each other, collectively determining the final imaging outcome.

 

Key Point 1

Is a higher frequency always better for probes?

(1)No, higher frequency is not always better.

(2)Frequency is directly proportional to spatial resolution but inversely proportional to penetration depth.

(3)Resolution and penetration depth have an inherent physical trade-off.

(4)Resolution should match organ size, while penetration should cover the target depth.

(5)According to clinical standards,focus on demand—ensure resolution meets diagnostic needs while retaining sufficient penetration depth.

 

Key Point 2

Modern technologies balance resolution and penetration depth. In this trade-off, bandwidth becomes a critical factor influencing resolution.

(1)Bandwidth:The range of ultrasound frequencies a probe can tranit or receive.  

∆f=operational bandwidth      fcenter=center frequency

(2)Spatial Resolution Formula: δz≈0.77/BW   

*Example:fcenter=5MHz

Bandwidth (40% BW @ 5MHz):  = 0.46mm

Bandwidth (100% BW @ 5MHz):  = 0.15mm

(3)Modified formula for spatial resolution incorporating frequency and bandwidth

BW > 0.4fo, bandwidth becomes the dominant factor in resolution

This is why 23 can be greater than 30

Key Point 3

Sensitivity directly determines the system’s ability to detect weak echo signals,For mice and rats,Sensitivity holds deeper significance in image quality and ysis, with its importance even surpassing traditional metrics such as resolution.

(1)Definition of Sensitivity:The efficiency of converting electrical signals to ultrasound waves (tranit) and echoes back to electrical signals (receive).

(2)Quantified by: Signal-to-Noise Ratio (SNR) and conversion efficiency (dB).

(3)Influencing Factors:

  • Piezoelectric material technology

  • Probe design technology

  • Signal processing technology

Key Point 4

Material revolution is the key driver of technological advancement

Modern single-crystal probes can simultaneously improve bandwidth and sensitivity, breaking traditional limitations and making high resolution & deep penetration possible.

(1)Comparison Between Single Crystal Materials and Traditional Piezoelectric Ceramics

Performance Metrics

Piezoelectric Ceramic

Single Crystal

Improvement

Electromechanical Coupling

0.45-0.50

0.85-0.92

80-100%

Piezoelectric Coefficient

500-600

2000-2500

300-400%

Dielectric Constant

3000-4000

5000-8000

150-200%

Acoustic Impedance

30

28-32

Similar

Energy Conversion Efficiency

50%

85%

170%

Bandwidth

60-80%

80-120%

130–150%

 

(2)Improvements in stability and reliability are more critical than enhancements in technical performance.

  • Single-crystal structures have fewer defects, ensuring stronger long-term stability. Minimal performance fluctuation under prolonged operation or temperature changes, leading to higher imaging consistency.

  • Slower material aging, extending probe lifespan.

  • Single-crystal materials achieve high output at low voltages, enabling more compact ultrasound device designs and improved portability.

 

 

Vermon technical pathway

 

1、256 Elements

  • Elements are the core units of ultrasound probes, responsible for tranitting and receiving ultrasound signals. Higher element count enhances beam steering capability and imaging resolution.

  • 256-element probes represent high-end configurations in medical ultrasound.

  • Vermon achieves leading performance in resolution, sensitivity, and functional versatility through high-density element arrays and advanced single-crystal material technology.

2、Six-Layer Matching Technology

  • Multi-layer matching gradually transitions acoustic impedance across layers, allowing more acoustic energy to penetrate tissues and boosting echo signal strength. For example, a 6-layer design improves energy transfer efficiency from 50% (traditional 2-layer) to over 90%.  

  • High-frequency signals are highly sensitive to matching layers. Multi-layer designs preserve high-frequency components, ensuring effective signals for high-resolution imaging.

  • The 6-layer matching technology resolves core issues of energy loss in traditional probes through precise impedance-gradient engineering. It excels in deep-tissue imaging and weak-signal detection, becoming a standard in premium ultrasound systems.

Vermon as a global leader in high-frequency medical ultrasound probe technology, primarily serves medical device manufacturers, research institutions, and specialized medical facilities. Vermon has not disclosed its customer list; information can be acquired through literature search.Global industry leaders including GE, Siemens (SIE), and Philips (PHG) are all established clients of Vermon.

Obtain A Quotation

Submit